... ID="672">^{<#9280#>2.1<#9280#>}

... con\-fir\-ma\-tion^{<#9596#>2.2<#9596#><#9596#>2.2<#9596#>}

<#661#>to avoid the alertbox, press <#771#><#772#>〈<#772#>Alt<#773#>〉<#773#><#774#>〈<#774#>Undo<#775#>〉<#775#><#771#> <#661#>

... mouse^{<#9638#>2.3<#9638#><#9638#>2.3<#9638#>}

<#393#>Moving the mouse to quick may cause the mouse handler to miss some interrupts, resulting in some rather odd behaviour of the cursor.<#393#>

...DEGAS^{<#9716#>2.4<#9716#>}

... visible^{<#9765#>2.5<#9765#><#9765#>2.5<#9765#>}

<#459#>If it is not visible, move the mouse a bit<#459#>

... computer^{<#9772#>2.6<#9772#>}

... position^{<#9779#>2.7<#9779#><#9779#>2.7<#9779#>}

<#478#>The delay between the cursor key codes can be set with the ``Delay'' parameter<#478#>

... menu^{<#9783#>2.8<#9783#><#9783#>2.8<#9783#>}

<#481#>The default configuration can be changed with the macro command REASSIGN<#481#>

... ID="1018">^{<#9791#>2.9<#9791#><#9791#>2.9<#9791#>}

<#485#>You must reserve at least 25kB of system memory for this to work, the memory will only be used as long as the view mode is active<#485#>

... ``function-key''^{<#9844#>2.10<#9844#><#9844#>2.10<#9844#>}

<#506#>This means characters between the macro commands are sent aswell<#506#>

... codes^{<#10227#>2.11<#10227#><#10227#>2.11<#10227#>}

<#650#>typically { ,} ,[ and ] are missing<#650#>

... BIOS^{<#10242#>3.1<#10242#><#10242#>3.1<#10242#>}

<#2816#>Basic Input Output System<#2816#>

... them^{<#10826#>6.1<#10826#><#10826#>6.1<#10826#>}

<#4286#>one could naturally store the decoded vectors<#4286#>

... key^{<#11651#>C.2<#11651#><#11651#>C.2<#11651#>}

<#8032#>Remember that enough system memory has to be reserved for programs to run in.<#8032#>